JTG-ZF-RS602 Flame Detector

The device is an Ultraviolet-only flame detector designed to detect fires and provide alarm outputs directly from the 
The device is an Ultraviolet-only flame detector designed to detect fires and provide alarm outputs directly from the detector while maintaining false alarm immunity. It detects in the ultraviolet (UV) spectral range for optimized speed of response.
It is fast and capable to detecting the ultraviolet (UV) rays emitted by a burning substance and is used in high hazard applications such as petrochemical plants, munitions factories and other areas where flammable or explosive liquids or solids are handled or stored.
The flame sensor adopts an ultraviolet photosensitive tube, with qualities of highly sensitive, reliable, dust-resistant, corrosion proof and moisture-resistant, therefore is not sensitive in sunlight, dust, oil, tolerance of fume, and humidity. 

SPECIFICATIONS
Operating Voltage Range:   12 to 28 VDC Volts
Standby Current:  ≤10 mA @ 24 VDC
Alarm Current : ≤30 mA @ 24 VDC
Spectrum:   180~290nm
Detection Angle:  120 degree
Detection Sensitivity:  Grade I, 25m@flame (Container 33cmX33cm,Height 5cm with 2Kg ethanol )
Relay Contact Load:  1A@DC24V
Normal Status:  LED blinking in 5 seconds interval
Alarm Status:  LED lit steady 
Protection rating:  IP 21
Operating Humidity Range: 10% to 93% Relative Humidity, Non-condensing
Operating Temperature Range: -20°C to 55°C
Height: 45 mm installed in Base 
Diameter: 103 mm
Weight:   153g