AFP901 Series Addressable Fire Alarm Control Panel

The panel can be surface mounted and the generously sized metal back box allows ample space for rear or top cable entries.

The panel is an addressable fire alarm control panel capable to connect up to 250 addressable devices per loop.

Each of the system components has been specifically designed to operate as part of the system. This provides assurance that the control panel, smoke detectors, interface devices and the ancillary components

are all fully compatible with one another and that the full range of system functionality is supported by each device.

SPECIFICATIONS

Primary AC :90 to 270VAC 50/60 Hz

Standby current:50mA@220VAC(no load) max.

Standby current: 60mA@220VAC(full load) max.

Alarm current: 80mA@220VAC max.

main fuse current:2A@250VAC

Power supply rating : 3Amps @ 24VDC

Battery type :2 X 12V/4.5Ah max. sealed lead acid.

Maximum battery charging current :0.9 Amps @ 27VDC

Addressable loop capacity : 250 addressable devices

Detection loop standby current :85mA max(250 loop devices connected).  

Free voltage output :28V, 1000 mA self ressetable fuse.

Cabling type of loop :10-18AWG Twisted pair(2.5mm2 -1.0mm2 )

Load resistance of loop :50 Ohm max.

Load capacitance of loop :300pF max.

Cabling type of output 28VDC :10-18AWG Twisted pair(2.5mm2 -1.0mm2 )

Or Single strand copper core wire

Enclosure Dimensions :315mm(L)×400mm(H)×92mm(W)

Net Weight :5kg (Without batteries)