EN
AR
CS
DA
FR
DE
EL
IT
JA
KO
NO
PT
RU
ES
SV
TL
VI
TH
MS
CFD813 Conventional Smoke&Heat Detector
The detectors are photo-electronic detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm panel.
- Overview
- Related Products
The detector is a smoke and heat composite detection alarm detector.It is designed to provide open area protection and to be used with most conventional fire alarm panel.
A red LED flashes every six seconds indicating that power is applied and the detector is working properly. The red LED latch on in alarm. LED will be off when a trouble condition exists indicating
that the detector sensitivity is outside the listed limit. The alarm can be reset only by a momentary power interruption. The detector that initiated the alarm condition will have its red LED latched until reset by fire alarm control panel.
SPECIFICATIONS
Operating Voltage Range: 9 to 28 VDC, Non-polarized
Standby Current: ≤50µA@24VDC
Maximum Alarm Current (LED on): ≤35mA@24VDC
Operating Humidity Range: ≤95%RH(40°C±2°C) Relative Humidity, Non-condensing
Operating Temperature Range: -10°C to 50°C
Alarm type: Resettable detectors
Smoke Alarm Sensitivity: 0.15-0.3dB/m
Category: A2R ( Typical temperature 62°C )
Remote LED: Only for CFD813-R.
Standard:EN54-7:2018&EN54-5:2017
Height: 56.8 mm installed in Base
Diameter:100 mm
